Air-water monobloc heat pump which provides the year round runs the annual climate. It does not burn any fossil fuel: capture the energy in the air and multiplies it. Every kW, produces more than 4 thermal energy: 75% of the energy is free, renewable and clean.
The engineering of components has made it possible to insert a 3-way valve for the management of Domestic Hot Water. The reduced size allow installation inside a kitchen cabinet.
The control is extremely flexible and the following interfaces can be used:
The programmable thermostat (included as per standard) with easy-toread liquid crystal display. It contains the most advanced functions for controlling the various types of heat pump systems. The operating logic considers the climatic season and the heat load required and consequently adjusts the frequency of the motor on the basis of the difference between outdoor environment temperature and water flow temperature.
The remote control (additional) with possibility of environment temperature and humidity control.
Provides DHW: with temperatures up to 60C Climatic curves: based on outside air temperature:two for cooling and twelve for heating or it's possible to add the customized climatic curves. The climatic curves allow you to change the system temperature according with external climate conditions, adjusting the heat input to the heat requirements of the building in order to obtain energy savings. Cconfigurable set points for heating and cooling: Two configurable set points in cooling.
Two configurable set points in heating. Refrigerant gas: R410A.* Daily programmer with night mode: night mode provides energy savings of up to 20%. Complete management of antilegionella cycles. Anti freeze protection: managed by the software. Remote control panel: with possibility of environment temperature and humidity control.
Non hermetically sealed equipment containing fluorinated gas with GWP equivalent 2088